Beta Phase Formation of Polypropylene with Bentonite Filler

Authors

  • Tomás Lozano Universidad Autónoma de Nuevo León
  • Ana Beatriz Morales Instituto Tecnológico de Cd. Madero
  • Pierre G. Lafleur École Polytechnique de Montréal
  • Felipe Cerino Universidad Autónoma de Nuevo León
  • Julio Laria Universidad Autónoma de Tamaulipas
  • Homero Salas Universidad Autónoma de Tamaulipas
  • Rodolfo Barragan Universidad Autónoma de Tamaulipas
  • Roberto Pichardo Universidad Autónoma de Tamaulipas

DOI:

https://doi.org/10.29105/qh2.2-139

Keywords:

Composites, polypropylene,, beta phase, bentonite, treated filler, dispersion state

Abstract

In this paper, a study on Polypropylene (PP)/bentonite composites is presented. PP/bentonite composites were prepared using 5%, 10% and 25% of concentration in weight of unmodified and modified bentonite filler. The relative leve! of the beta phase of the samples was calculated using Wide Angle X-ray Diffraction (WAXD). Differential scanning calorimeter (DSC) was used to observe the melting and crystallization behaviour of the samples. The dispersion state of the composites was observed using optical rnicroscopy. The obtained results show the possibility of inducing the beta phase in PP material using bentonite as filler. However, only the composites of polypropylene with modified bentonite showed the beta signa! and higher content was at 10% of filler. Although at 10% of modified bentonite the dispersion is worse than in 5%, at 10% there are more nucleating sites for beta phase formation and consequently more beta content. However, as concentration ofthe filler increases to 25%, the nucleating sites also increase but its dispersion into the compound becomes worse which strongly decreases the beta phase formation.

Downloads

Download data is not yet available.

Author Biography

Felipe Cerino, Universidad Autónoma de Nuevo León

Facultad de Ciencias Químicas 

References

-[1] Jarvela P. A., and Jarvela P. K .. (1996), Journal of Materials Science, 31, 3853.

-[2] Tjong S. C., Li R. K. Y., and Cheung T. (1997) Polymer Engineering and Science, 37, 166. DOI: https://doi.org/10.1002/pen.11657

-[3] Lozano T., Lafleur P. G., Grmela M., Thibodeau C. (2004) Polymer Engineering and Science, 44,880. DOI: https://doi.org/10.1002/pen.20079

-[4] McGenity P. M., Hooper J. J., Paynter C. D., Riley A. M., Nutbeem C., Elton N. J., Adams J. M., Polymer, 33, 5215 (1992). DOI: https://doi.org/10.1016/0032-3861(92)90804-6

-[5] Rybnikar F. (1989) Journal of Applied Polymer Science, 38, 1479. DOI: https://doi.org/10.1002/app.1989.070380806

-[6] Liu J., Wei X. and Guo Q (1990) Journal of Applied Polymer Science, 41, 2829. DOI: https://doi.org/10.1002/app.1990.070411125

-[7] Jacoby P., Bersted B. H., Kissel W. J., and Smith C. E. (1986) J. Polym. Sci. Polym. Phys. Ed., 24,461. DOI: https://doi.org/10.1002/polb.1986.090240301

-[8] Keith H.D,Padden F. J., WalterN. M. andWycofIM. W. (1959) J.Appl.Phys.,30, 1485. DOI: https://doi.org/10.1063/1.1734986

-[9] Turner J. A., Aizlewood J. M., and Beckett D. A. (1964) Macromol. Chem., 75, 134. DOI: https://doi.org/10.1002/macp.1964.020750113

-[10] Meille S.V, Briickner S., Porzio W. (1990) Macromolecules, 23, 4114. DOI: https://doi.org/10.1021/ma00220a014

-[11] Briickner S, Meille S. V. (1989) Nature, 340,455. DOI: https://doi.org/10.1038/340455a0

-[12] Smit l., Musil V. and Svab l. (2004) J. Appl. Polym. Sci. Vol. 91, 4072-4081. DOI: https://doi.org/10.1002/app.13626

-[13] Meng M. R. and Dou Q. (2008) Materials Science and Engineering A, 492, 177-184. DOI: https://doi.org/10.1016/j.msea.2008.03.048

-[14] Crissman J.M, J.Polym.Sci., A-2,7, 389(1969). DOI: https://doi.org/10.1002/pol.1969.160070210

-[15] Dragaun H., Hubeny H., Muschik H., J. Polym. Sci. Polym. Phys. Ed., 15, 1779 (1977). DOI: https://doi.org/10.1002/pol.1977.180151008

-[16] Samuels R. and Yee R. Y., J. Polym. Sci., A-2, 10, 385 (1972). DOI: https://doi.org/10.1002/pol.1972.160100301

-[17] Labour T, G. Vigier, R. Seguela, C. Gauthier, G. Orange, Y. Bomal, J. Polym. Sci. Part B: Polym. Phys.40, 31 (2002). DOI: https://doi.org/10.1002/polb.10068

-[18] Tabtiang A., R. Venables, Composite Interfaces, 6(1 )65, (1999). DOI: https://doi.org/10.1163/156855499X00305

-[19] Tjong S. C., Shen J. S., Li R. K. Y.Polymer, 37, 2309 (1996b). DOI: https://doi.org/10.1016/0032-3861(96)85340-7

-[20] Tjong S. C., Shen J. S., Li R. K. Y., Polym. Eng. Sci., 36, 100 (1996a). DOI: https://doi.org/10.1002/pen.10390

Downloads

Published

2012-03-31

How to Cite

Lozano, T., Morales, A. B., Lafleur , P. G., Cerino, F., Laria, J., Salas, H., … Pichardo , R. (2012). Beta Phase Formation of Polypropylene with Bentonite Filler . Quimica Hoy, 2(2), 14–17. https://doi.org/10.29105/qh2.2-139